+8613456528940

Caurules diametra ietekme uz saules elektriskā apkures kabeļa uzstādīšanu

Jan 14, 2022

Saules ūdens sildītāja cauruļvada antifrīzam un siltuma saglabāšanai tiek izmantots paš-temperatūras elektriskās apkures kabelis. Tā priekšrocības ir neliela starta strāva, ātrs sildīšanas ātrums, vienkārša uzstādīšana un bezrūpīga lietošana. Tas ir enerģiju taupošs- un videi draudzīgs produkts.


Kad lietotājs iegādājas saules elektriskās apkures kabeli, kā to uzstādīt? Kuru uzstādīšanas metodi vislabāk izvēlēties? Tas lietotājiem patiešām apgrūtina darbu. Patiesībā saules elektriskā marķieris ir drošs

Instalēšana ir ļoti vienkārša, ja vien apgūstat tālāk norādītās instalēšanas pamatprasības, lietotāji to var instalēt paši.


Uzstādīšanas metode

 1. If the diameter of the water heater pipe is greater than 3 cm, the winding installation method shall be adopted. Attach the solar electric heating cable to the pipeline and wrap it in parallel at equal distances. Note

Ir paredzēts, lai elektriskais apkures kabelis būtu pēc iespējas plakans, bez jebkādas atlaides. Piestipriniet to ar alumīnija folijas lenti vai spiedienjutīgu{0}}lenti un pēc tam pārklājiet ar blīvējošu un ūdensnecaurlaidīgu izolācijas slāni.

 2. The diameter of the water heater pipe is less than 3 cm (including 3 cm), and the single parallel installation method is adopted. Attach the solar electric heating cable to the pipeline and lay it in parallel.

Starp elektrisko sildīšanas kabeli un cauruļvadu nedrīkst būt spraugas, un tas jānostiprina ar spiedienjutīgu -lenti vai alumīnija folijas lenti un pēc tam jāuzliek siltumizolācijas slānis ar labu ūdensnecaurlaidību.


Izolācijas cauruļvads

 1. The water supply pipeline of the solar water heater and the water supply pipeline are cold water to prevent the sub-zero temperature from causing the pipeline to freeze or burst;

 2. The heated downspout pipe is hot water, which can maintain the temperature of the hot water, supplement the lost heat, and prevent the pipe from freezing and cracking;

 Precautions

 1. Do not make the electric heating cable folded or overlapped to prevent short-circuit fire and poor thermal insulation effect.

 2. There is no gap between the electric heating cable and the pipeline, and the thermal insulation effect is better.

 3. The end junction box (terminal junction box) of the electric heating cable has good sealing performance, and the end of the installation end should be placed outdoors; the end connected to the power supply should be placed indoors, which can prevent

Ūdens nokļūst elektriskajā apkures kabelī, izraisot īssavienojumu vai aizdegšanos.

 4. The maximum length of the solar electric heating cable is 50 meters, and a single installation should be used as much as possible; when the heating cable and the heating cable need to be connected and installed, the intermediate junction box can be used and sealed to prevent the junction box from entering the water.

 5. Install leakage protection switch or air switch.

 6. Please consult a technician before installation, or install under the guidance of a technician.


Nosūtīt pieprasījumu